Description

 

The next generation of Alpine S-Series amplifiers are designed to take your car audio experience to the next level without breaking the bank. With a sleek new redesign and upgraded features from their predecessors, these amplifiers offer exceptional performance and power on an affordable budget.

The next generation S-Series S2-A60M mono subwoofer amplifier makes it a lot easier to get great bass in your vehicle, delivering up to 600 Watts RMS power @ 2 Ohms. A variable bass boost allows you to dial in some extra punch and impact for more low-frequency enjoyment. You can even add an optional wired remote to control the level of bass from your front seat.

A built-in low-pass filter puts you in command of the frequency spectrum that reaches your sub. The amp includes pre-amp- and speaker-level inputs, so you can install it in almost any vehicle, even one with a factory radio. When using the speaker-level inputs, the amp can sense the incoming signal and turn itself on, eliminating the need to run a separate turn-on wire to the receiver or fuse box.

S-Series amplifiers are available in two mono, a 4-channel and a 5-channel configuration.

 

AN ALL-NEW AUDIOPHILE EXPERIENCE FOR S-SERIES

What is Hi-Res Audio?

With Hi-Res Audio streaming services and music downloads available you can now appreciate a higher sampling rate than in CD’s for the playback of music, which brings your favourite music tracks to life with extreme clarity. Alpine’s Hi-Res Audio Certified Head Units, Amplifiers and Digital Signal Processors are painstaking engineered to deliver faithful audio reproduction from high resolution sources and recordings with sample rates up to 192kHz/24Bit. These components are optimised for high definition playback and breathtaking performance, true to the artists original recording.

Why Hi-Res Audio?

Listening to Hi-Resolution Audio allows you to feel every emotion and hear every nuance; every detail of your favourite artist’s original studio performance is reproduced to perfection. Hi-Res Audio provides absolutely no distortion for the ultimate listening experience.

Why Hi-Res Audio Certified?

Hi-Res Audio goes beyond the limits of ordinary amplifiers and speakers. To accurately render the sound of Hi-Resolution sound sources and recordings in true high definition the reproduction of an extended dynamic frequency range right up-to 40kHz is paramount.

 

 

 

Unparalleled Power

Alpine’s S-Series Mono Amplifiers are the perfect solution for unparalleled power and performance on a budget. With a power output of 1200W at a 1 Ohm or 2 Ohm drive for the S2-A120M and 600W for the S2-A60M — these mono amps are capable of driving even the most demanding subwoofers, delivering clean and distortion-free bass for a wide range of applications.

 

 

Easy Control Access

The amplifier was intentionally designed with sound controls located on the side panels, instead of the top panel, making it easier to access gain and crossover controls when installed under vehicle seats or in shallow-depth locations. Removable end caps were added to cover the side controls and connections, providing a clean, sleek finish to the amplifier.

 

 

Designed for Supreme Performance

The S-Series line-up Class-D design delivers a new level of sound quality and reliability, so you can hear the full power and clarity of your music without the concern of shutdown. Equipped with high-quality parts and precision manufacture brings incredible performance and value way beyond their modest price and nearest rival.

 

 

Made for S-Series Subs

The S2-A60M amplifier is designed to perfectly match the Alpine S-Series subwoofer line for perfect system building. S-Series components are designed for bass enthusiasts that want to build a great sounding system without breaking the bank, for a fun and great sounding experience.

 

 

Control Your Subwoofer

Conveniently control your subwoofer directly from the dash with the optional RUX-KNOB.2 remote bass knob controller. This accessory is also applicable for the S-A32F for when channels 3 and 4 are bridged.

 

 

Flexible Application

New to the Next-Generation S-Series amplifiers is a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

 

 

 

Specifications:

Install

• Terminal Layout: Two-sided
• Included terminal covers
• Screw terminals (for speaker and power cables)

General

• Class-D Amplification (Digital)
• Channel Design: Mono Channel
• Side panel controls
• Thermal Management Control
• Top Mounted LED Power/Status Indicator
• Speaker Level Input
• 3 turn-on modes (DC HI, Remote HI, Remote LO)
• Input Channel Selector Switch for Subwoofer
• Crossover: Variable Low-pass Filter (LPF)
• Adjustable Gain Control
• Bass EQ
• Remote Bass Control (RUX-KNOB2) Ready

RMS Power Ratings

• Per Channel into 1 Ohms, 14.4V (≤1%THD+N): 1 x 600W
• Per Channel into 2 Ohms, 14.4V (≤1%THD+N): 1 x 600W
• Per Channel into 4 Ohms, 14.4V (≤1%THD+N): 1 x 330W

Sound Tuning

• Crossover: Variable LPF: 50-400Hz (-24dB/oct)
• Bass EQ (+12dB)

General

• Power Requirements: 14.4 V.DC (9 – 16 V allowable)
• Input Sensitivity (RCA Input): Hi: 0.5V – 10V / Low: 0.2V – 4.0V
• High Level Input with automatic power on
• Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz – 400Hz
• THD+N (@ 10W into 4 Ohms): <0.03%
• Damping Factor: >1000
• Weight: 2.2kg

Dimensions

• Heat Sink (WxHxD) mm: 220 x 57 x 210